How to Install Vinyl Corner Bead - Drywall

Installing vinyl corner bead is quick and easy.  Here’s how to do it.

Tuoxin are exported all over the world and different industries with quality first. Our belief is to provide our customers with more and better high value-added products. Let's create a better future together.

Cut the corner bead to length using snips or heavy-duty scissors. As with other beads, it should sit 1/2 in. above the floor to prevent cracking if the building settles.

Where corner beads meet, cut back the flanges to prevent overlaps. Dry-fit to verify lengths and angles are correct.

Make sure all surfaces are clean and free of dust before installing the corner bead. To install, spray adhesive to both sides of the corner, moving steadily to get an even coat. Check the instructions on the can to see how far away to hold the spray nozzle from the surface.

Want more information on PVC Corner Bead with Fiberglass Mesh for sale? Feel free to contact us.

Apply adhesive to the inside of the bead in a similar fashion.

Once the adhesive is tacky, install it on the corner, and apply pressure along the entire length of both flanges to bond the adhesive. A spackling knife or roller can help with this process.

Once the adhesive cures—usually within about half an hour—the bead is ready for drywall compound.

Contact us to discuss your requirements of Bulk Supply Fiberglass Wallboard Tape, Drywall Tape Fiberglass. Our experienced sales team can help you identify the options that best suit your needs.