How Does Crawler Mounted Pneumatic Tophammer Drill Rig Work?

A cpneumatic crawler drilling rig is a light-duty deep-hole drilling rig that uses compressed air as power and is equipped with a crawler walking structure. Pneumatic crawler drill is mainly composed of track assembly, chassis assembly, drive assembly, fuel tank assembly, control assembly, column assembly, main engine assembly, hose assembly and other parts. It has the advantages of 360 ° horizontal angle drilling and so on. Crawler pneumatic drilling rigs can drill holes for water discharge, gas drainage, pressure relief holes in the bottom plate, slit holes in the roof, geological exploration holes, and mine blast holes. It saves time and effort and works efficiently.

If you are looking for more details, kindly visit JK Drilling.

The drilling operation and walking of the crawler pneumatic drill rig are controlled by an independent console. For drilling operations, you must first stabilize the drilling rig and turn the start-stop button of the drilling rig console to the stop position, and then move the back-end ball valve on the pumping station to get the air source for the drilling rig's pneumatic console.

As one of our most popular types of drilling equipment, it is very convenient to use. There are two reversing valves on the console to control the rotation and advance as well as retreat of the drilling rig respectively. There is also a ball valve to control the amount of water in the punching process. The right control valve controls the rotation of the rig. Push it forward, the host will rotate forward; pull it backward, the host will reverse; and push it to the middle position, the host will stop. The left control valve controls the forward and backward of the gyrator. When pushing it forward, the gyrator advances; when pulling it backward, the gyrator retreats; and when pushing it to the middle position, the gyrator stops.

The pneumatic crawler drill can be used when connected to the high-pressure tuyere. No motor and no electricity is required, so there is no risk of explosion and the safety parameter is high. The pneumatic crawler drill can work across belts and scrapers. It is suitable for perforation and blasting in mines, earth and rock engineering, severe cold areas, extreme areas, and high-altitude areas. It can also be used to drill and guide detection holes in tunnels and mines.

The crawler pneumatic drill rig is a kind of light walking crawler with deep hole drilling rig powered by compressed air. It is suitable for the construction of water exploration, gas exploration and gas drainage holes in underground coal mines. The crawler pneumatic drill rig uses compressed air as the power source, which is safe and convenient for it to walk. In addition, what other advantages are worth using in the mine?

Want more information on Crawler Mounted Pneumatic Tophammer Drill Rig? Feel free to contact us.

1. The track of the crawler pneumatic drill rig can rotate automatically, and the drilling range is 360° horizontally and 360° vertically.

2. The crawler pneumatic drill rig can reach out of the car body for drilling, and it is easy to cross the belt support machine and other coal mine working devices for the drilling operation.

3. With its small external size, it can walk freely in a 0.8-meter tunnel. The high-power walking system is equipped with a vehicle-mounted drill pipe space. The feed of the drilling rig adopts an independent motor, so the feed speed is easy to control.

4. This type of industrial drilling equipment has a structure of the muffler that minimizes noise, which can effectively improve your working environment. The crawler pneumatic drill rig has a split structure for supporting the column to facilitate underground transportation through the air gate. The whole machine is equipped with a large-capacity oil mist device, thus it can be used for a long time once being filled up.

5. The crawler pneumatic drill rig is equipped with different drilling tools to realize the construction of exploration and relief holes, and the matching large-diameter drill bit has an obvious effect on drilling pressure relief holes. it pioneers in its drilling diameter, drilling depth, etc. In the drilling construction of any soft and hard medium, the bit cutting terminal always maintains a power output of more than 20kW and is more efficient than the similar products in the market.

Are you interested in learning more about DTH Drill Bits? Contact us today to secure an expert consultation!